It's a professional durable matte acrylic paint for heavy duty environments and bathrooms. It's environmentally friendly and safe, odorless. The paint forms a durable, wet-clean resistant coating.
Class I abrasion resistant according to ISO 11998.
The high-strength paint is intended for painting interior walls, ceilings and architectural elements. It can be applied to brick, concrete or mineral surfaces, wood, wallpaper or previously painted surfaces.
It can be tinted to any color and is presented in two bases:
A — for tinting light colors,
C — for tinting dark and bright colors.
PREPARATION
• The substrate must be clean, dry and firm. Remove crumbling and flaking old coatings, prepare the surface.
• General surface preparation: apply Primer to plastered, chalky or absorbent surfaces, including brick, concrete, wood. Use coveing primer for wallpaper or previously painted walls.
• The paint is ready for use. Mix thoroughly before application.
• Do not dilute with water!
• Dilute with Conditioner at a ratio of 5 to 20% of paint volume.
APPLICATION
The high-strength paint is applied in two coats be roller, brush or spray gun, including airless spraying. When calculating the amount of material to be used, take into account that airless spraying increases the consumption by 50-70 ml/m².
For dark and bright colors it is recommended to apply in three layers, consumption 250-280ml/m².
The application temperature should be not lower than +10°С.
The tools should be cleaned with warm water and soap.
COLORING
The high-strength paint is tinted with MeToo or Monicolor pigments in any color according to the palettes: mka.paint, NCS, RAL Classic, RAL Design, Benjamin Moore, Sherwin Willians, Farrow&Ball, Little Greene, Paint&Paper, Dulux and others.
The paint can also be sample tinted in individual colors with the selection of pigment formula.
SPECIFICATIONS
Storage temperature: +5 to +25°С
Shelf life: 12 months
Resistance class: 1+
Glossiness: 5
Intermediate drying: 6 – 8 hours
Through drying: 24 hours
Coating appearance: even, smooth, matte, without foreign inclusions.
Composition: aqueous polymer dispersions, methylhydropropylcellulose, coagulant, mineral additives, preservative.
Manufactured in accordance with TU 20.30.11-009-72723477-2022
